Electronic Air Cleaner (EAC)

An electronic air cleaner can trap and filter up to 99% of airborne particles that pass through your HVAC system, making sure that cleaner air is distributed to all rooms within your home. When the air goes through this device, the pre-filter traps many of the larger particles and adds a charge to smaller particles, which are attracted to a plate where they are collected. Electronic air cleaners effectively remove microscopic impurities from your air. This includes dust, smoke, and smog, in addition to pet dander and mold spores. While these may seem like harmless particles, they can actually make you and your family sick. This is particularly true for those who suffer from allergies or asthma. For the best results with an electronic air cleaner, it’s important that you make sure to clean the plates on a regular basis. The effectiveness of this device does wear down as dirt accumulates on the plates, but a quick wipe-down will resolve this. Overall, electronic air cleaners are an excellent way to filter the air you breathe and keep you and your family healthy.

PRODUCT FEATURES​

check-mark

Operating Conditions

- Continuous operating temperature 4`52C. Not suitable for the flammable environment

check-mark

Efficiency (EN779:2012)

- E8/MERV15 (ASHRAE 52.2)
- PM2.5 testing efficiency: >90% at 2.5m/suitable(with pre-filter)
- Microbes testing efficiency: >90%
- Able to remove particle with size up to 0.01um

check-mark

Indicators

- Operation, cleaning and malfunction indicators
 

check-mark

Long Service Life

- Up to 15 years
 

check-mark

Power Consumption

- Low Power Consumption
 

SPECIFICATIONS

Electronic Air Cleaner filter has an average efficiency for PM2.5 removal efficiency >90% and for Microbes removal efficiency >90% as per F8(EN779)/MERV15(ASHRAE52.2 standard), this can remove formaldehyde, benzene, TVOC etc. During the operation, dust, tiny particles and microbes are carbonized at the collecting plate for the prevention of secondary pollution.

Discharge electrodes emit charging current and provide a voltage that generates an electrical field between the discharge electrodes and the collecting plates. The electrical field forces dust particles in the gas stream to migrate toward the collecting plates. The particles then precipitate onto the collecting plates.

PRODUCTS SPECIFICATIONS LIST

Parameters Unit Single Ionic Cell Double Ionic Cell
Serial Number
EAC-370x610x180-AC-ST EAC-680×6180-AC-ST
Nominal Dimension (WxHxD) mm 370x610x180 680×6180
Actual Dimension (WxHxD) mm 369x610x182 681x610x182
Number of Ionic Cell
1 2
Input Voltage / Current V/A 220v/0.18A 220v/0.21A
Output Voltage / Current kV/mA 6.2kV/3.2mA 6.2kV/3.2mA
Power W 32 39
Filtration Efficiency
F8 F8
Initial Pressure Drop Pa 20 20
Air Volume m1/h 1700 3400
Weight kg 12 18